TensorGrip L10

TensorGrip L10

As part of our WOODWORKING range, TensorGrip L10 is a web spray adhesive designed for use in fabricating contours, countertops and cabinets using the substrates listed.

Tensorgrip L10 is high performance industrial contact spray adhesive formulated for bonding laminate on porous or tough- to-bond materials.

TensorGrip L10 Key Benefits

• Fast. High Tack
• Excellent high coverage
• 80% of final strength achieved •
  immediately
• Full strength achieved in 24 •
  hours
• Fast drying with long open time
• Excellent green strength and high heat resistance
• Over 105°C temperature resistant
• Low odour
• Non-flam adhesive

TensorGrip L10 Directions For Use

• TensorGrip L10 is designed as a portable, self-contained spray system for field or shop applications.
• Apply adhesive to both surfaces to be mated, at 80% to 100% coverage.
• Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding.
• Parts should be mated with as much pressure as practical.
• Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may
  need a second coat. Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days.
• Canister system will spray adequately above 15oC. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
• Notice!!! Do not store at temperatures over 50oC.

TensorGrip L10 Canister/Storage Change Over

1. If you choose to leave the hose and spray gun on your TensorGrip L10 canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister. Close and lock the spray gun.
2. To change or disconnect canister: turn canister valve to the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister.
3. Reconnect the spray hose to a new canister of adhesive. OR if you are NOT connecting to a new canister, connect hose to canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean.

TensorGrip L10 Chemical Technical Data

• Total Solids / 22-28%
• VOC Content / 106 g/L
• Color / Clear or Quin Blue
• System Flammability / Non-Flammable Adhesive; Flammable Propellent
• Solvent System / Methylene Chloride
• Dry time / 2-4 mins dependent on temp & humidity
• Open time / Long
• Shelf Life / 18 months from date of manufacture