TensorGrip L32

SKU OA-TG-L32 Categories , ,

$242.73$3,999.09

TENSORGRIP L32 HIGH STRENGTH CONTACT ADHESIVE

TensorGrip® L32 is a High Strength Contact Adhesive designed for multi purpose laminating. It also works well on edging and smooth surfaces such as metal and melamine. Ordio Adhesives, a division of Ordio Productions is a proud distributor of TensorGrip products and supplies aerosols, canisters, and jumbos to a multitude of industries Austra-wide.

 

TENSORGRIP L32 ADVANTAGES

  • Quick drying with an extended open time
  • High solids formula
  • Excellent bond strength
  • Low odour
  • Excellent high coverage

 

TENSORGRIP L32 DIRECTIONS FOR USE

  • TensorGrip L32 is designed to be applied to both surfaces to be bonded together. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc. For best results, the temperature of the adhesive and the surfaces being bonded should be between 16°C – 27°C.
  • Use TensorGrip L32 with adequate ventilation. Shake the canister well before use. Attach and secure hose tightly onto the spray gun with the required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, check for leaks during this process. Unlock the trigger on the spray gun to start spraying.
  • Prior to use, Check compatibility by spraying a small test patch of the adhesive on the substrate. TensorGrip L32 may degrade some substrates.
  • Spray about 10-20 cm away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.
  • Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.
  • If the spray tip clogs, unscrew the spray tip from the gun and clean with solvents such as lacquer thinner or TensorGrip® S105 acetone cleaner. Do not use a pin on the spray tip orifice.

 

TENSORGRIP L32 CHEMICAL TECHNICAL DATA

  • Viscosity: 180 cps
  • Total Solids: 24.2% +/- 2%
  • System Flammability: Non-flammable adhesive in flammable propellant
  • Shear: > 250 p.s.i
  • Tensile (180° Peel): > 25 p.l.i.
  • Shear adhesion failure temp: (SAFT) 100gram> 126°C
  • Dry time: 1-3 mins dependant on temp & humidity
  • Open time: Long
  • SHELF LIFE: Long

 

TENSORGRIP L32 HANDELING & STORAGE

  • Consult Material Safety Data Sheet prior to use
  • Do not store at temperatures over
    50°C
  • Avoid exposure to direct sunlight
  • Do not store directly on concrete floor
  • Always store above 15°C
  • When connected, keep valve open and hose pressurised at all times
  • Always test our adhesives to determine suitability for your particular application prior to use in production

 

TENSORGRIP L32 CANISTER STORAGE & CHANGE OVER

  • Leave the valve on the canister open. Do not disconnect the hose/gun from the canister (unless changing to a new canister)
  • To change or disconnect canister: turn canister valve to the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister
  • Reconnect the spray hose to a new canister of adhesive. if you are NOT connecting to a new canister, connect hose to canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean

 

TENSORGRIP L32 KICK OFF KIT

TensorGrip Kick-Off Kits are available for first-time customers only. An example of the supplied kit is shown within the image gallery. Only first-time customers are eligible to receive a one-off FREE kit. As soon as your online order has been placed your details will be cross-referenced with our database of existing registrants. Once validated a free kit will be supplied with your Canister or Jumbo order of TensorGrip L20. Note that Kick Off Kits are not supplied with Aerosol products.

Spray Guide

Brochure

MSDS

TDS

Tip Guide

Cleaning

TERMS OF SALE

1. There are no refunds or exchanges for this product.

2. Standard freight may take up to 7-14 days to metro zones.

3. Express freight may take up to 2-5 days to metro zones.

4. Further delays can be expected to all non metro zones. 

5. Our freight carriers may not be able to contact you prior to delivery.

5. All deliveries must be signed for, domestic addresses may attract a futile delivery charge if no one is present for the delivery. 

$242.73$3,999.09

Clear

Related Products

Click to access the login or register cheese