TensorGrip T65

SKU OA-TG-T65 Categories , ,

$35.00$568.00 Ex GST

TENSORGRIP T65 HI TEMP HEADLINING SPRAY ADHESIVE

Tensorgrip® T65 is a high-temperature headlining and interior fit-out adhesive designed specifically for the Australian environment. With an effective bonding range between -16˚C and 120˚C, this revolutionary new T65 adhesive can handle anything this country can throw at it.

TENSORGRIP T65 APPLICATIONS

  • Foam
  • Fabric
  • Leather
  • Plastic
  • MDF
  • Web Spray

TENSORGRIP T65 ADVANTAGES

  • Quick drying with an extended open time
  • High solids formula
  • Excellent bond strength
  • Low odour
  • Excellent high coverage

DIRECTIONS FOR USE

  • This product is designed to be applied to both surfaces to be bonded together. Make sure that surfaces are clean, dry and free from dirt, dust,
    oil, loose paint, wax or grease, etc.
    For best results, the temperature of the adhesive and the surfaces being bonded should be between 16°C – 27°C.
  • Use with adequate ventilation. Shake the canister well before use. Attach and secure the hose tightly onto the spray gun with the required tip. Attach the other end of the hose to the canister. Make sure the hose-valve connections are securely tightened. Open the valve on the canister slowly and fully, and check
    for leaks during this process. Unlock the trigger on the spray gun to start spraying.
  • Prior to use, Check compatibility by spraying a small test patch of the adhesive on the substrate. This product may degrade some substrates.
  • Spray about 10-20 cm away at a 90-degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.
  • Adhere surfaces and press together with adequate pressure. A roller is recommended to apply uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.
  • If the spray tip clogs, unscrew the spray tip from the gun and clean it with solvents such as lacquer thinner or TensorGrip® S105 acetone cleaner. Do not use a pin on the spray tip orifice.

CHEMICAL TECHNICAL DATA

  • Viscosity: 180 cps
  • Total Solids: 24.2% +/- 2%
  • System Flammability: Non-flammable adhesive in flammable propellant
  • Shear: > 250 p.s.i
  • Tensile (180° Peel): > 25 p.l.i.
  • Dry time: 1-3 mins depending on temp & humidity
  • Open time: Long
  • SHELF LIFE: 18 months from the date of manufacture

Spray Guide

Brochure

MSDS

TDS

Tip Guide

Cleaning

TERMS OF SALE

  • There are no refunds or exchanges for this product.

  • We no longer ship to residential addresses.

  • Free freight applies to metro zones only.

  • Customers must download and read through the available MSDS documents 

$35.00$568.00 Ex GST

Related Products